DSPIC30f2010 PURE SINE INVERTER CIRCUIT WITH CHARGER

THE DSP30f2010 INVERTER . 
The circuit am sharing today is an inverter circuit which can also charge every inverter/solar battery with a selected charge current.
As said earlier, the inverter / circuit runs on a digital signal processing micro-controller made by micro-chip. You can download the datasheet by clicking Here.

The inverter has the following functions and protections.

1. Ability to work as inverter or UPS.

2. MOSFET protection system using LM324

3. Better battery charging algorithm

4. Low voltage protection

5. high voltage Protection

6. Works on 12V, 24V, 48V, 96V, 120V

7. Overload protection

8. Over charging protection

9. Over battery protection

10. Load display

11. Cooling fan failure detection and tripping with alarm

12. NTC sensor failure detection and tripping with alarm

13. Over Temperature protection

14. The circuit board can be used to repair all pure sine inverters.

15. Set your own maximum load, charging current and set almost everything by yourself if you don't   want the default values

16. Low battery alarm

17. Low Battery cut-off



19. The circuit can be used to build high current 3 stages charger with current rating from 1A-100A

20.  will use either 16x2 or 16x4 LCD

However  the circuit diagram for this inverter is given below:

step :1 circuit 

step :2 circuit

step 3 circuit

DOWNLOAD CODE FOR DSPIC30F2010 IN CODE SECTION

code will be ready soon